Glossary - Inhep Digital Security IDS404 User Manual

IDS404 USER MANUAL

Glossary

Alarm This is the history of the most recent violations that
Memory occurred the last time the system was armed.
Arm To set the system into the ARMED mode. In this mode,
violating a zone will activate an alarm condition. If the
system is programmed accordingly, this will cause a
reporting code to be sent to the monitoring company.
Bypass To deactivate a zone. When the panel is ARMED,
violation of a bypassed zone will be ignored.
Disarm To deactivate the system. Fire, medical and panic
functions remain active while the system is disarmed.
Entry/ Exit A zone with a programmable time delay, which allows the
Zone user to exit the premises after arming the system and
time to get to the keypad after entering the armed
premises. This zone is generally the last exit point of the
building and the first entry point i.e. the front door of a
home.
Follower A zone that may be temporarily violated during the exit
Zone delay period or after violation of an entry/ exit zone. This
allows the user access to disarm the system. A Follower
zone will behave as per an Instant zone if violated prior to
the violation of an entry/ exit zone.
Instant When the system is armed, violation of an instant zone
Zone will immediately cause an alarm condition to be
registered.
Stay Arm Arming that allows for certain preprogrammed, STAY
zones to be violated while the system is armed.
Stay Arm Arming that allows the user to STAY ARM and leave the
and Go premises.
Stay Zone Zones which are bypassed automatically when the
system is STAY ARMED.
Zone A specific area of your premises guarded by sensors
which detect violations of that area.
IDS404 USER MANUAL NO. 700-277-01A ISSUED SEPT 2004 VER 1.01 5