Functions In Standard Mode; Scan Result Screen In Standard Mode; Image Of Printer Output In Standard Mode - Mcube BioCon-500 User Manual

User's Manual for BioCon-500

2) Functions in Standard Mode

Function
GEN. (←)
RESET(→)
PRINT
SETUP(↑)
Mcube Technology Co., Ltd.
www.mcubetech.co.kr
TM
Push the left arrow key to change the gender as fig.3.5.
Push the right arrow key to go to initial page as Fig.3.1 in any
status.
Print out the current SCAN results in one session as Fig.3.4.
"NO DATA AVAILABE" message appears if pressing PRINT
button without having any measured data.
Push the up arrow key to go to SETUP page
(See page 16, 3.4.1 SETUP in Standard Mode )
Fig.3.3
SCAN result screen in
standard mode
Fig. 3.4
Image of printer output in
standard mode
(Print Option : Raw Image)
Description
9/41