Changing The Thermal Printer Paper; After Using The Device - Mcube BioCon-500 User Manual

User's Manual for BioCon-500

3.11 Changing the thermal printer paper

3.12 After Using the device

The method of keeping the device after using
-. After using the device, users should keep the normal environment with the
temperature of 10
exposed to the sun.
-. Since the surface of the probe affects the result of data, users should take special
caution not to scratch the surface of the Probe.
-. Probe should be protected against external impacts when users move or keep the
device
Mcube Technology Co., Ltd.
www.mcubetech.co.kr
TM
~ 40 and the humidity of 0% ~ 80% RH in a clean room not
℃ ℃
a. Open the printer cover as
the left image.
b. Grab a printer paper in one
hand as the left image and
slightly pull out the paper
to insert in the paper cart
by using the other hand.
c. Close the printer cover after
inserting papers in printer
cart.
31/41