User's Manual for BioCon-500
3.6.2 Print Function
Press the PRINT button at the state of fig. 3.6 after one scan session, to display
as following.
Item
PRINT
HIST(→)
SET(↑)
EXIT(↓)
Mcube Technology Co., Ltd.
www.mcubetech.co.kr
TM
Fig 3.40 PRINT function in Advanced mode
Prints out the results (including the image and the measured
value) of 12 planes at the thermal printer.
Prints out the frequency of each range in one session
(currently not applicable)
Fig 3.41 HISTOGRAM output
Prints out the current SETUP status
Fig 3.42 Setup Status output
Exit to initial page.
Function
28/41