Results - Mcube BioCon-500 User Manual

User's Manual for BioCon-500
Acoustic
output freeze
I tt
I ts
Inclusive
modes

5.1.2 Results

p_ (MPa)
I (mW/cm
SPTA
System settings
I (mm)
p
w
pb6
prr (kHz)
srr (Hz)
Output beam dimensions
f (MHz)
awf
c
APF (%)
d
AIF (%)
Maximum power
I (mW/cm
ob
Power-up mode
Initialization mode
Acoustic output freeze
Mcube Technology Co., Ltd.
www.mcubetech.co.kr
Write down "YES " if the system is supplied with an output freeze
facility. All Medison currently are supplied with this facility.
mm Transducer to Transducer output face distance is the distance
along the beam alignment axis between the surface containing
the active face of the transducer or elements and the transducer
output face (usually the lens thickness)
mm Transducer Standoff distance is the shortest distance between
the transducer output face and the patient entry plane. The term
"contact" is used to connate direct contact between the
transducer output face and the patient.
Make a note of the Inclusive Modes for this particular declaration
which are not being declared separately.
2
)
a
(||) (mm)
( ) (mm)
   
b
(mm)
e
(mW)
2
)
TM
0.0313
8.98 x 14.0
0.305
60.0
4.99
5.85
N/A
6.00
2.77
100
<100
0.279
0.222
B
f
N/A
Yes
35/41