Does The Engine Stop?; Does The Engine Stop After Each Of These Tests? - Honda 08E91-E54-100 Installation Insructions

2. Press the engine/command button on the transmitter
and release, within 2 seconds, then press the unlock/
stop button.

Does the engine stop?

Yes - Operation is normal.
No - Check the engine starter harness connections.
3. After the engine has stopped, start the engine again,
and check that the engine stops after each of the
following conditions:
NOTE: After each test the ignition key must be cycled, or the
driver's door must be opened and closed.
• Move the shift lever out of the P position.
• Unlock or open the doors or the tailgate.
• Open the hood.
• Insert the key in the ignition.
• Press the brake pedal.

Does the engine stop after each of these tests?

Yes - Operation is normal.
No - Check the engine starter harness connections.
4. Make sure the power windows and the moonroof do not function, and the shift lever does not move to any position
when the vehicle system is started with the transmitter.
5. Start the vehicle system again, press the engine/command button on the transmitter two times, and check the
vehicle condition on the display.
6. Check the operation of the transmitter when the vehicle is 120 m (400 ft.) away and in direct sight.
7. Press the unlock/stop button on the transmitter and verify that the doors unlock. Press the lock/start button, and
verify that the doors lock.
8. Make sure the vehicle key can start the engine, and that the wipers and the headlights operate normally.
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
ENGINE/
COMMAND
BUTTON
UNLOCK/
STOP
BUTTON
*1 Only on vehicles equipped with the automatic climate control.
This indicator is displayed for some vehicles among them.
AII 50024-50373 (1308)
ENGINE START
OPERATION
*1
LOCK/
START
BUTTON
B127121H
IN-CAR
*1
TEMPERATURE
RECEPTION
INDICATOR
CHECKING
INDICATOR
Blinking
ENGINE
RUNNING
INDICATOR
REMAINING
IDLING TIME
25 of 25