Remote Engine Starter Registration - Honda 08E91-E22-101A Installation Instructions Manual

99. Open the hood. Using isopropyl alcohol on a shop
towel, thoroughly clean the hood where the caution
label will attach.
HOOD
Clean with
isopropyl alcohol.
CAUTION
LABEL
ADHESIVE
BACKING
Remove.
100. Remove the adhesive backing from the caution
label, and attach the caution label to the hood in the
area shown.
101. Check that all wire harness and cables are routed
properly and that all connectors are plugged in.
102. Reinstall all removed parts.
103. Reconnect the negative cable to the battery.
104. Check the operation of the headlights and wipers.
105. Press and hold the radio power button for two
seconds to restore the radio and navi (if equipped)
system functions.
106. Reset the clock on vehicles without navigation.
107. Proceed to the REMOTE ENGINE STARTER
REGISTRATION (Page 23) and FUNCTION
CHECK (Page 26).
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.

REMOTE ENGINE STARTER REGISTRATION

1. Acquire the PCM Code from ISIS.
Q0N2011AG
2. Connect the HDS tester to the OBD II data link
connector, then turn the ignition switch to the on (II)
position.
3. Start the HDS, and click the car icon.
4. Input the VIN and other required information into the
HDS, then click the check button.
AII 13148-49239 (1302)
Input the VIN and other
required information.
CAR ICON
792901AH
CHECK BUTTON
752502AS
23 of 27