Remote Engine Starter Registration; Check Button - Honda 08E91-E22-101B Installation Instructions Manual

REMOTE ENGINE STARTER REGISTRATION

1. Acquire the PCM code from ISIS.
2. Connect the HDS tester to the OBD II data link
connector, then turn the ignition switch to ON(II).
3. Start the HDS, and click the car icon.
4. Input the VIN and other required information into the
HDS, then click the check button.
Input the VIN and
other required.
© 2008 American Honda Motor Co., Inc. – All Rights Reserved.
5.
CAR ICON
6.
752501AS

CHECK BUTTON

752502AS
AII 39870-40753 (0810)
Select Honda Systems, then click the check button.
Select
"Honda Systems."
Select the R/C ENG STARTER and click the check
button.
Select the
"R/C ENG STARTER."
CHECK BUTTON
752503AS
CHECK BUTTON
752504AS
17 of 20