Advertisement
Quick Links
INSTALLATION
INSTRUCTIONS
ARTS LIST
Remote Control Engine Starter Unit Kit
P/N 08E91-E54-100
Transmitter
Control unit
Antenna
ID label
Remote Control Engine Starter Attachment Kit
P/N 08E92-SZA-100A
Engine starter harness
Control unit bracket
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
Accessory
REMOTE CONTROL
ENGINE STARTER
08E91-E54-100
2
Flange nut
Ground bolt
16 Wire ties
Long wire tie
3
Caution label
Fuse label
AII 51572 (1405)
Application
2015 PILOT
Relays
Urethane tapes
Publications No.
AII 51572
Issue Date
MAY 2014
1 of 20
08E92-SZA-1000-90
Advertisement
Related Manuals for Honda 08E91-E54-100
Summary of Contents for Honda 08E91-E54-100
-
Page 1: Installation Instructions
ID label Remote Control Engine Starter Attachment Kit Urethane tapes P/N 08E92-SZA-100A Engine starter harness Caution label Control unit bracket Fuse label 1 of 20 © 2013 American Honda Motor Co., Inc. – All Rights Reserved. AII 51572 (1405) 08E92-SZA-1000-90... -
Page 2: Installation
Illustration of the Engine Starter Installed on the Clean with Vehicle isopropyl alcohol. ANTENNA QBD0601AE 2 RELAYS ENGINE START- ER HARNESS 3A FUSE CONTROL QC61801AG UNIT 40A FUSE 2 of 20 AII 51572 (1405) © 2013 American Honda Motor Co., Inc. – All Rights Reserved. - Page 3 NOTE: If the hook did not stay pushed in, return the driver’s sunvisor to its original position and repeat steps 7 and 8. 3 of 20 © 2013 American Honda Motor Co., Inc. – All Rights Reserved. AII 51572 (1405)
- Page 4 TABS SEAL (Pull away.) 7 RETAINING TABS LEFT SIDE DASHBOARD COVER SELF-TAPPING A/C SENSOR SCREW VEHICLE CONNECTOR 792205CE DRIVER’S 792403CE DASHBOARD LOWER COVER 4 of 20 AII 51572 (1405) © 2013 American Honda Motor Co., Inc. – All Rights Reserved.
- Page 5 20. Plug the two relays into the relay block. COVER 2 RELAYS 2 SELF-TAPPING ENGINE SCREWS STARTER SCREW HARNESS 792405AE RELAY BLOCK 792003BY 5 of 20 © 2013 American Honda Motor Co., Inc. – All Rights Reserved. AII 51572 (1405)
- Page 6 22. Attach the control unit bracket to the control unit. CONTROL UNIT VEHICLE BRACKET BRACKET CONTROL UNIT CONTROL FLANGE NUT UNIT STEERING SHAFT 792401CY QC61803AG 6 of 20 AII 51572 (1405) © 2013 American Honda Motor Co., Inc. – All Rights Reserved.
- Page 7 4-pin connector. STEERING WHEEL VEHICLE 4-PIN CONNECTOR (WHITE) CLIP VEHICLE BRACKET 792403AY BLUE TAPE (Remove.) ENGINE STARTER HARNESS 4-PIN CONNECTOR 792501AY 7 of 20 © 2013 American Honda Motor Co., Inc. – All Rights Reserved. AII 51572 (1405)
- Page 8 FUSE CONNECTORS FUSE WHITE VEHICLE TAPE 792503BY CLIP STEERING SHAFT 792706BY 33. Route the engine starter harness 2-pin connectors behind the fuse box. 8 of 20 AII 51572 (1405) © 2013 American Honda Motor Co., Inc. – All Rights Reserved.
- Page 9 36. Using isopropyl alcohol on a shop towel, clean the vehicle bracket where the urethane tape will attach. Attach the urethane tape to the vehicle bracket. 9 of 20 © 2013 American Honda Motor Co., Inc. – All Rights Reserved. AII 51572 (1405)
- Page 10 HARNESS CASE 12-PIN VEHICLE ENGINE CONNECTORS 12-PIN STARTER CONNECTOR HARNESS TURN ENGINE FRONT SIGNAL STARTER SWITCH HARNESS 792703AY SWITCH BODY 792701AY 10 of 20 AII 51572 (1405) © 2013 American Honda Motor Co., Inc. – All Rights Reserved.
- Page 11 NOTE: Make sure the engine starter harness 5-pin connector is securely connected to the ignition switch. A loose connection can cause the engine to stall. 11 of 20 © 2013 American Honda Motor Co., Inc. – All Rights Reserved. AII 51572 (1405)
- Page 12 URETHANE TAPE HALVES OF (Cut in half.) URETHANE TAPE QB62501BK (Do not fold 7-PIN the antenna cable.) CONNECTOR 7-PIN ENGINE CONNECTOR 792604DY STARTER HARNESS 12 of 20 AII 51572 (1405) © 2013 American Honda Motor Co., Inc. – All Rights Reserved.
- Page 13 ADHESIVE With Automatic Day/Night Mirror BACKING 10 mm (0.4 in.) COVER ANTENNA FRONT WINDSHIELD QB51401CH MASKING TAPE COVER MASKING TAPE FRONT WINDSHIELD QC61808AG 13 of 20 © 2013 American Honda Motor Co., Inc. – All Rights Reserved. AII 51572 (1405)
- Page 14 30 seconds. CABLE • Remove the masking tape. 4 WIRE TIES VEHICLE HARNESS ANTENNA LEFT A-PILLAR ADHESIVE MASKING TAPE BACKING (Remove.) (Remove.) 792711AY QB51405CH 14 of 20 AII 51572 (1405) © 2013 American Honda Motor Co., Inc. – All Rights Reserved.
- Page 15 60. Bundle up the excess antenna cable. Secure the VEHICLE QC61811AG HARNESS antenna cable to the engine starter harness with two wire ties. 15 of 20 © 2013 American Honda Motor Co., Inc. – All Rights Reserved. AII 51572 (1405)
- Page 16 Remote Control Engine Starter.” Input the VIN and other CHECK BUTTON required information. QB32102BH Select Honda Systems, then click the check button. 16 of 20 AII 51572 (1405) © 2013 American Honda Motor Co., Inc. – All Rights Reserved.
- Page 17 VIN will be required to obtain the Select password. (USA) Click the check button. “R/C ENG STARTER.” “Obtain PCM-code” message. CHECK BUTTON QB32104AH CHECK BUTTON QB32106AH 17 of 20 © 2013 American Honda Motor Co., Inc. – All Rights Reserved. AII 51572 (1405)
- Page 18 Remote Control Engine Starter Unit has been completed. Turn the ignition switch off. “The registration of the Remote Control Engine Starter Unit has been completed.” QB32108CH 18 of 20 AII 51572 (1405) © 2013 American Honda Motor Co., Inc. – All Rights Reserved.
- Page 19 Press the unlock/stop button on the transmitter and verify that the doors unlock. Press the lock/start button, and verify that the doors lock. 19 of 20 © 2013 American Honda Motor Co., Inc. – All Rights Reserved. AII 51572 (1405)
- Page 20 Check that the engine can start by the vehicle key and that the wiper and the headlight can be operated normally. 20 of 20 AII 51572 (1405) © 2013 American Honda Motor Co., Inc. – All Rights Reserved.