Click the "Port1" link to enter the settings page.
2.
3.
Select the appropriate Baud Rate, Data Format and Modbus Protocol settings
from the relevant drop down options, for example "115200" , "8", "None", "1" and
"Modbus RTU".
4.
The pair-connection settings area as follows:
4-1 Select "Client" from the "Server Mode" drop down options.
4-2 Select "TCP" from the "Modbus Protocol" drop down options.
4-3 Type the IP address of the Slave Device (Ex, tPET-P6) in the "Remote Server
IP" field.
4-4 Assign a TCP port for the Slave Device (Ex, tPET-P6) in the "Remote TCP
Port" field.
Click the "Submit" button to complete the configuration.
5.
The Steps 3 ~ 5, please refer to the following illustration.
tGW-700 Series User Manual, Version 1.7, Mar 2013
2
-
59 -