ICP DAS USA tGW-700 Series User Manual page 32

7. Enter the IP address and TCP Port of tGW-700, and then click "Connect" button to connect
the tGW-700.
7
8. Refer to the field "Protocol Description" at the top right of the program. You can send a
request command and confirm the response is correct.
(Ex: If M-7000 Modbus device ID = 1, you send "1 2 0 0 0 6 1 2 0 0 0 4" for reading D/I value,
you may receive response "1 2 0 0 0 4 1 2 1 0")
Type the command
8
tGW-700 Series User Manual, Version 1.7, Mar 2013
9
esponse Data
R
10
Complete
-
32 -