Alpine INE-S920E Owner's Manual page 99

01GB00INE-S920E.book Page 99 Tuesday, June 12, 2012 10:56 AM
Connection of a Mobile Digital TV Receiver/USB Player and DVD Changer
Camera Connector
AUX/PRE OUT cable
(Yellow)
(Red)
(White)
REMOTE OUT
(Brown)
Camera cable
1 Video/Audio Input Connectors (AUX INPUT)
2 RCA Extension Cable (Sold Separately)
3 Remote Control Output Lead (Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
• You can connect one more external input device only when the "Primary Name" is set to "DVB-T." Refer to "Setting the Primary AUX Name (AUX
Setup)" (page 50).
• To connect an external input device to the iPod VIDEO connector, set "AUX3 In Sel." to "AUX3. " Refer to "Setting the AUX3" (page 51).
01GB06INE-S920E.fm
iPod VIDEO input connector
AUX/PRE OUT Connector
To Video Output terminal To Video Input Terminal
Mobile Digital
TV Receiver
(Sold
separately)
To Audio Input
To Audio Output Terminal
Terminal
REMOTE IN
(White/Brown)
4 AV/RCA interface cable (4-pole mini AV plug to 3-
RCA) (sold separately)
5 Video/Audio Input Connectors
YELLOW is for input video, RED is right and WHITE is left
input the audio.
To Video Output terminal
DVD Player
(sold separately)
To Audio Output terminal
To Video Output terminal
To Audio Output
Terminal
REMOTE OUT REMOTE IN
(White/Brown) (White/Brown)
ALPINE INE-S920E/INE-Z928E 68-21057Z31-A (EN)
DVE-5207, etc.
DVD Changer
(Sold
separately)
99
-EN