Table of Contents
Advertisement
01GB00INE-S920E.book Page 54 Tuesday, June 12, 2012 10:56 AM
Adjusting the Calling Volume
[Calling Volume] is selected on the BLUETOOTH setup menu in step
3.
Refer to "BLUETOOTH Setup Operation" (page 51).
You can adjust the receive volume, during the call.
Setting item: Calling Volume
Setting contents: 1 to 11 (Initial setting: 5)
Deleting All the Histories
[Delete Call History] is selected on the BLUETOOTH setup menu in
step 3.
Refer to "BLUETOOTH Setup Operation" (page 51).
Dialled/Received/Missed Incoming histories are all deleted.
Setting item: Delete Call History
1
Touch [Delete Call History]
The confirmation screen is displayed.
• When there is no history, this option is not available.
2
Touch [OK].
All the histories are deleted.
54
-EN
01GB04INE-S920E.fm
Camera Setup
Camera Setup Operation
With an optional camera connected, its video is output to the monitor.
When the camera is connected, set this item.
The parking brake must be engaged to access the Setup screen.
Attempting to access this screen while driving will display the
warning-Unable to operate while driving.
The following steps 1 to 5 are common operations to each
"Setting item" of Camera Setup. Refer to each section for
details.
1
Touch [Setup] icon of Top banner.
The Setup main screen is displayed.
2
Touch [
(CAMERA)].
The Camera Setup screen appears.
3
Select the desired item.
Setting items: Direct Camera/AUX Camera*/Camera Interrupt
(Power OFF Mode)
4
Touch [
] or [
] etc., to change its setting.
• When the pop-up window for setup is displayed, touch [
close the window after setting.
5
Touch [
] to return to the previous screen.
• Immediately after changing the Camera Setup (while the system is
writing data automatically) do not turn the ignition key to OFF.
Otherwise, the settings may not be changed.
• For details on how to scroll through the list, refer to "Selecting an
Item in a List" (page 27).
ALPINE INE-S920E/INE-Z928E 68-21057Z31-A (EN)
] to
Advertisement
Chapters
Table of Contents
