Selecting A City/Town Centre As The Destination - Alpine INE-S920E Owner's Manual

31-A (EN)

3.1.1.4 Selecting a city/town centre as the destination

The city/town centre is not the geometric centre of the city/town but an arbitrary point the map
creators have chosen. In towns and villages, it is usually the most important intersection; in
larger cities, it is one of the important intersections.
1. In the Navigation menu, tap the following buttons:
2. If necessary, modify the country as described earlier (page 26).
3. Select the destination city/town:
a. Tap
b. Start entering the name of the city/town on the keyboard.
c. Find the city/town you need:
The most likely city/town name is always shown in the input field. To
accept it, tap
If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
results before it appears automatically, tap
the city/town from the list.
4. Instead of entering the street name, tap
the displayed city/town becomes the destination of the route.
5. A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
location. Tap
to select a different destination.
,
.
.
to confirm the destination, or tap
31
ALPINE INE-S920E/INE-Z928E 68-21057Z31-A (EN)
.
). Select
. This way the centre of
) appears at the new