Installing The Secondary Sheave, V-Belt And Primary Sheave - Yamaha XF50W Service Manual

I f ' /
®
©
/F^r~\\
5-50
BELT DRIVE
5. Install:
8secondary sheave 1
8spring
8clutch carrier 2
NOTE:
Attach the clutch spring holder 3 and clutch
spring holder arm 4 onto the secondary sheave
as shown. Then, compress the spring, and
tighten the clutch carrier nut 5 .
Clutch spring holder
90890-01337 (YM-33285)
EAS00325
INSTALLING THE SECONDARY SHEAVE, V-
BELT AND PRIMARY SHEAVE
1. Install:
8V-belt 1
8secondary sheave 2
cC
Do not allow grease to contact the V-belt,
secondary sheave assembly.
NOTE:
8 Install the V-belt onto the primary sheave
side.
8 Install the V-belt with printed arrow mark on
the V-belt facing in the direction shown in
the illustration.
2. Tighten:
8 clutch carrier nut
X I 55Nm(5.5m * kg, 39.8ft
NOTE:
While holding the clutch carrier with the rotor
holding tool © , tighten the clutch carrier nut with
the socket wrench®.
ENG
m
%
( YM-33285-6)
* lb)