(If
/)>
~~~G77\-__
^v-
3^
REAR WHEEL AND BRAKE
EAS00567
CHECKING THE REAR WHEEL DRIVE HUB
1. Check:
•
rear wheel drive hub
Cracks/damage
EAS00569
CHECKING THE BRAKE
The following procedure applies to all of the
brake shoes.
1. Check:
•
brake shoe lining
Glazed areas
Sand the glazed areas with course sand-
paper.
12270603
NOTE:
After sanding the glazed areas, clean the brake
shoe with a cloth.
2. Measure:
•
brake shoe lining thickness a
Out of specification
w
Do not allow oil or grease to contact the
brake shoes.
NOTE:
Replace the brake shoes as a set, if either is
worn to the wear limit.
4-15
CHAS (3^3^)
-»
Replace.
-»
Repair.
-»
Brake shoe lining thickness limit
(minimum)
2.0 mm(0.08 in)
Replace.