Table of Contents
Advertisement
HC-800 Controller
Installation Guide
Requirements and Specifications
Prior to installing the HC-800, ensure that Ethernet
network wiring is in place. If you're using WiFi, see
"Antenna Considerations."
HC-800 Specifications
Model Number
Network
Media Recognition
Audio Playback Formats
Display
Power Requirements
Dimensions
Weight
Shipping Weight
Additional Resources
The following resources are available for additional
support.
• Control4 Knowledgebase or Forums
• Control4 Technical Support
• Control4 website: http://www.control4.com
• Composer documentation in online help or PDF
format available on the Dealer portal
2
™
C4-HC800-BL
- Ethernet—required
- WiFi (only supported
when the device is used as a
Secondary Controller)
Online CD/DVD/Blu-ray
recognition and media
information service
MP3: 32kbps to 320kbps, CBR,
VBR, AAC, and FLAC
LED indicators
100-240 VAC, 60/50 Hz, 0.4
A MAX
H x W x D: 2.80" (71 mm) x
11.98" (304 mm) x 7.24" (184
mm)
6.1 pounds (2.766 kg)
7.95 pounds (3.606 kg)
Front View
Figure 1. Front View
1
WiFi LED. This LED blinks Orange and then Blue
during the boot process. When the operating
system starts running, the WiFi driver changes
the LED color depending on the signal strength
of its connection to its associated access point.
Colors for signal strength: Orange=Fair to Good,
Blue=Excellent, and No Light=No connection or
not enabled.
2
Data LED. The Blue LED indicates that streaming
audio is received.
3
Link LED. The Blue LED indicates that the
Controller has been identified into a project.
4
Power LED. The Blue LED indicates that AC
power is present. The LED blinks during the boot
process.
5
IR Window/IR Blaster—Captures third-party IR
codes from hand-held devices (such as remote
controls) or blasting IR codes.
Back View
Connect all applicable devices to the HC-800 using
the connection options described next.
Figure 2. Back View
4
1
8
6
2
7
5
3
1
ZigBee. The antenna for the ZigBee radio.
NOTE: If you run ZigBee, use the external
antenna (provided).
2
Power Plug Port. AC to DC power adapter for the
WIFI
DATA
LINK
4
3
2
5
1
16
17
10
12
18
14
9
13
11
19
15
Hide quick links:
Advertisement
Table of Contents
