Initial Start-Up; Pre-Power On; Power On - Lang ECOH-AP Installation And Operation Instructions Manual

INITIAL START UP

Pre-Power On

After th oven is installed and connected to power, prior to turning on, verify the following
• The door opens and closes freely
• All racks are in the oven correctly
• All packing materials have been removed from the inside of the oven

Power On

Once the oven has been turned
on verify that the blower wheel
is spinning freely in a clockwise
position and that the elements
are heating properly.
Switch the back-up controls on
and make certain it can run the
unit,
Confirm that the thermostat
knob in the back-up controls is
move freely.
AP units
Confirm that all knobs move
freely and thet timer beeps.
During the first few hours of operation you may notice a small amount of smoke
NOTICE
coming from the oven, and a faint odor from the smoke.
This is normal for a new unit and will disappear after the first few hours of use.
10
Blower Wheel
Back-Up Controls
IL1456