DRYER SAFETY ................................................................. 2
Tools and Parts ........................................................... 3
VENTING ........................................................................ 13
VENTILACIÓN ................................................................ 31
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed:
Flat-blade screwdriver
Wire stripper
(direct wire installations)
1/4" nut driver
(recommended)
Table of Contents
INSTALLATION REQUIREMENTS
#2 Phillips screwdriver
Tin snips
(new vent installations)
Vent clamps
Venting Kits ............................................................... 15
Connect Vent .............................................................16
Level Dryer ...............................................................16
Troubleshooting .........................................................19
Índice
Adjustable wrench that
opens to 1" (25 mm) or
hex-head socket wrench
Tape measure
Level
Utility knife
Pliers
Caulking gun and
compound (for installing
new exhaust vent)
3