Person - Chauvet Q-Wash 436Z-LED Quick Reference Manual

EN
DMX Linking
DMX Connection
Master/Slave
Connection
Mounting
Product
Mounting
Diagram
Control Panel
Description
Password
The Q-Wash™ 436Z-LED will work with a DMX controller using a
regular DMX serial connection. A DMX Primer is available from
www.chauvetpro.com.
The Q-Wash™ 436Z-LED uses a regular DMX data connection for its
DMX personalities: PERSON 1, PERSON 2, PERSON 3, PERSON 4,
and PERSON 5. See the User Manual to connect and configure for DMX
operation.
The Q-Wash™ 436Z-LED uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
Overhead Mounting
Button
Exits from the current menu or function
<MENU>
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases
<DOWN>
the numeric value when in a function
After being prompted, enter the following password by pressing:
<UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
This password cannot be changed and must be used whenever prompted.
Q-Wash™ 436Z-LED QRG
Clamp
Safety
Cable
Function
3
Floor Mounting