Structure Of The Menus And Functions; 5.1 Survey Of The Basic Menu - Hameg HM 8131-2 Manual

5.0 Structure of the menus and
functions

5.1 Survey of the basic menu

After switching on and the self test the basic menu will appear
showing the last instrument set-up before switching off. The
basic menu shows the selected frequency. Also the basic functions
Sin (sine),Tri (triangle) and Sqr (square wave) can be selected
here. In order to get to the functions: positive sawtooth, negative
sawtooth, spectrum the arrow
menus + Rmp, –Rmp, Spc the basic functions sine, triangle and
square wave are accessible using the backspace arrow
functions are selected via the group of pushbuttons
The function selected (Sin, Tri, Sqr, +Rmp, –Rmp) is marked with
a triangle. Selecting the function Spc a further menu is entered,
here 4 K arbitrary oder 16 K arbitrary signals and white or pink
noise are available.
In main menu 1 the operating mode (working mode)
will be Tr (trigger) or Gt (gated) instead of Fr (free
run).
STOP
Œ
LCD display with 2 lines of 20 char. each

Trigger input
Ž
Pushbutton menu

Slot for insertion of memory card

Pushbuttons for menu selection
‘
Pushbutton to go one step backwards in a menu
’
Indicator light for offset activated
Subject to change without notice
is used. Once in any of the
. The

.

Structure of the menus and functions

Switch on instrument and basic menu
*Function Generator*
**HM8131-2 V3.01**
Friday 24/01/03
16:55
Communication Device
** default rs232 **
Frequency Reference
Internal
Fr. 1.0000000 kHz Fr. 1.0000000 kHz
Sin Tri Sqr --> +Rmp -Rmp Spc <--
“
Set of pushbuttons for the selection of such functions which
are directly accessible via the knob resp. the keyboard
”
Incremental rotational control knob
•
Keyboard
ESC pushbutton for erasure of inputs
Output BNC connector (50 ohms)
Pushbutton for turning the output on/off
Mains switch
Arbitrary or Noise
4k 16k Pink White
57