Cleaning And Maintenance - ResMed VPAP Auto Manual

Cleaning and maintenance

You should regularly carry out cleaning and maintenance as described in this section.
Daily
1. Remove the air tubing by pulling on the finger grips on the cuff. Hang it in a clean, dry place until next
use.
2. Slide the H5i latch.
3. Lift open the flip lid and remove the water tub.
4. Wash the H5i water tub in warm water using a mild detergent.
5. Rinse thoroughly in clean water and allow it to dry away from direct sunlight.
6. Before next use, fill the water tub, return it to the H5i and close the flip lid.
Note: Do not open the H5i water tub. There are no user serviceable parts inside.
12
1
4
2
5
3
6