Sewing
25 Needle Positions
When topstitching using straight
stitch and reinforced straight stitch,
the needle position can be adjusted in
steps. Use the stitch width button (+),
0 is the center position, width 6 is left
needle position, width 6 mirror imaged
is right needle position. To return
to center po si tion, use the stitch width
button (-) and step back to 0. Adjust
the width between 0-6 for additional
positions.
To edge stitch, set the needle to the left
or the right position.
To sew about 2 mm from the edge,
snap on presser foot A when sewing
light fabrics and presser foot D for
other fabrics.
Select left needle position, place the
fabric and sew so that the edge follows
the inside right edge of the presser
foot D or the rst mark of the left
edge of the presser foot A.
If you wish to sew about 5 mm from
the edge or sew a narrow hem, use
pres ser foot A and set the needle to
the right position.
Place the edge of the fabric so that it
follows the outside right edge of the
pres ser foot and sew.
41