Embroidery Accessories; Removing The Embroidery Unit; Connecting The Embroidery Unit - Husqvarna Viking Scandinavia 400 User Manual

Embroidery

Embroidery Accessories

The Embroidery accessory bag
contains embroidery hoop, embroidery
booklet, embroidery template,
template pencil, embroidery card, a
pair of scissors, thread and a test kit.
Removing the Embroidery
unit
Touch CLR to move embroidery arm
to park position.
!
Turn off the main switch.
Make sure the machine is turned off
while removing the embroidery unit.
Press the release button (A) at the
center of the left side on the underside
of the unit and slide it off.
Remove the embroidery card.
Connecting the Embroidery
unit
!
Turn off the main switch.
Slide the arm of the embroidery unit
to the right of the needle and the
presser bar and push the unit to the
right until it plugs into the socket (B).
Turn on the machine to calibrate.
The embroidery unit is now ready. The
feed teeth are lowered automatically.
26
A
B