Pictogram - Husqvarna Viking Scandinavia 400 User Manual

Pictogram

Read about Programming on page 21.
Use presser foot B.
1. Program the leaf in an empty
memory.
2. Select NORM and reinforced
straight stitch
3. Sew the stem down to the rst pair
of leaves.
4. Select REP and sew a leaf from
the stem to the top.
5. Select straight stitch, stitch length
1,5. Sew from the top of the leaf
and back to the stem.
6. Sew the other leaf in the same way.
7. Select reinforced straight stitch and
continue sew the stem down to the
ower stem.
8. Then sew the stem as far as to the
ower.
9. Program the ball in an empty
memory.
10. Select REP and sew the ball.
11. Return to the memory containing
the programmed leaf.
12. Select REP and sew the ower
petal from ball to top. Stop with
the needle in the material.
13. Change to straight stitch, stitch
length 1,5.
14. Sew back close to the petal.
15. Sew the rest of the petals in the
same way.
Also: Consult Quick info for
Pictogram steps.
.
Sewing
55