3.2.10 Removing the Receptor Board Assembly (FI Board / RI Board)
Prerequisite conditions: 3.2.3/3.2.4/(RI board only)
FI Board (Located on the speaker bracket)
Screw
1. Disconnect the cable connector from the FI board.
2. Remove the screw mounting the FI board to the speaker bracket.
Screw: +M3×5 F/ZB: P/N1021795
(mounting torque: 4.0 kg. cm = 3.5 lb. inch)
EPSON PowerLite 5000 Service Manual
FI Board
Figure 3-20
3-17