Removing The Cn Board - Epson PowerLite 5000 Service Manual

3.2.20 Removing the CN Board

Prerequisite conditions: 3.2.3/3.2.4/3.2.8/3.2.13/3.2.17
Screw
1. Remove the screw mounting the CN board shield plate B.
Screw: +M3×5 F/ZN Bind: P/N 1033703
(mounting torque: 6.0 kg. cm = 5.2 lb. inch)
2. Disconnect the cable connectors connected to CN200/202 on the CN board.
3. To detach the CN board, remove the 2 screws mounting it to the projector.
Caution:
Arrange the cables in the cable guide.
Figure 3-35
3-27
EPSON PowerLite 5000 Service Manual
CN Board
Figure 3-36
Screw