Removing The Air Filter Frame - Epson PowerLite 5000 Service Manual

1. Remove the lamp cover mounting screws from the bottom of the lower case.
Screw: -M4*7.5 F/Ni: P/N1021771
(mounting torque: 4.5 kg. cm = 3.9 lb. inch)
2. Remove the two mounting screws from the lamp inner housing.
Screw: -M4*7.5 F/Ni: P/N1021771
(mounting torque: 4.5 kg. cm = 3.9 lb. inch)
3. Pull up the handle on the lamp inner housing and remove the lamp unit.
3.2.2 Removing the Air Filter Frame Unit
Remove the Air Filter Frame mounting screw from the bottom of the lower case. Then lift it
up.
Screw: -M4*7.5 F/Ni: P/N1021771
(mounting torque: 4.5 kg. cm = 3.9 lb. inch)
EPSON PowerLite 5000 Service Manual
Air Filter Frame
Screw
Figure 3-4
3-7