Features; Specifications - DSC PC2525 Installation Manual

FEATURES

Keypad Programmable
The PC2525 is complete with a default program so
that it is operational with a minimum of programming.
The control panel is completely programmable from
the keypad.
EEPROM Memory
The panel uses EEPROM memory which will retain all
program information even if AC and battery power is
removed from the panel. The EEPROM memory can
be reprogrammed thousands of times.
Static/Lightning Protection
The PC2525 has been carefully designed and tested
to provide reliable protection against static and
lightning induced transients. Our special "Zap-Trac"
circuit board design catches high voltage transients
right at the wiring terminals, and transient protection
devices are placed in all critical areas to further
reduce damaging voltages.
Supervision
• Low or disconnected battery
• Loss of AC power
• Loss of time on system clock
• Fire zone supervision using end-of-line resistance
• Bell supervision indicating open circuit or fuse failure
• Test code feature which transmits a communicator
test code to the monitoring station at programmed
intervals
• Keypad-activated bell/siren and communicator
test feature
• Telephone Line supervision
• Microprocessor "Watchdog" circuit
Operation
• Download / Upload capability
• Programmable auto downloading
• Swinger shutdown
• Transmission delay
• 8 Access Codes
• Master Code
• All zones programmable as fire zones
• Programmable test transmission
• Zone bypass from the keypad
• Eight zones
• Bell / Siren zone
• Programmable output
• Three dedicated keys (Fire/Auxiliary/Panic)
• Backlit aesthetically pleasing keypad

SPECIFICATIONS

PC2525 Control Panel
• Eight fully programmable zones
- EOL resistor supervised option
- all zones programmable as fire zones
- maximum zone loop resistance: 100 ohms
• Bell / Siren outputs: fused at 5 amp
- steady for burglary
- pulsed for fire
• Programmable output: 50 mA
- 16 programmable options
• Auxiliary power output: 400 mA maximum
• PC2550RK keypads: 5 maximum
• Maximum Current (Auxiliary and Keypad supplies)
- 575 mA with 16 VAC 40 VA transformer
- 250 mA with 16 VAC 20 VA transformer
• Battery: 12 VDC, 1.2 Ah minimum
- 1.2 Ah provides 3 hours of stand-by at 200 mA
auxiliary output (Auxiliary and Keypad supplies)
- 4.0 Ah provides 4.5 hours of stand-by at 575 mA
auxiliary output (Auxiliary and Keypad supplies)
• Transformer: 16 VAC, 20 VA minimum
• Panel dimensions:
- 11" high × 11.8" wide × 3.3"
(279 mm × 300 mm × 84mm)
- Surface mount
• Panel colour: light beige
PC2550RK Keypad
• Three keypad activated zones
Fire/Auxiliary/Panic
• Backlit keys
• 7 system lights
Ready, Armed, Memory, Bypass, Trouble, Fire, Program
• 8 Zone Lights
• Keypad dimensions
- 5.5" high × 4.5" wide × 1" deep
(140 mm × 114 mm × 25 mm)
- Surface mount
• Keypad colour - white
1