Instructions On Use - Leica DM500 Manual

Instructions on use

Intended use
The Leica DM500 and DM500 B microscopes are
optical instrument which use magnification and
illumination to improve the visibility of objects.
It is used for observing and documenting.
The Leica DM500 and DM500 B microscopes
may be used only in closed rooms and must be
placed on a solid floor.
The Leica DM500 or DM500 B microscopes can
be used in clean rooms without any problems.
•
Position the Leica
DM500 B microscope so that it can be
disconnected from the power supply at any
time. The power cord must remain accessible at
all times, because the power supply is foreseen
as mains disconnecting device.
Leica DM 500, DM500 B
Place of use
Only use the instruments in closed, dust free
rooms and between +10 °C and +40 °C. Protect
the devices from oil, chemicals and extreme
humidity. If using the devices outdoors, protect
them from dust and moisture. Never use electri-
cal devices outdoors. Install electrical devices at
least 10 cm from the wall and away from flam-
mable substances.
Avoid large temperature fluctuations, direct
sunlight and vibrations. These conditions
can distort measurements and micrographic
DM500 or images.
In warm and warm-damp climatic zones,
the individual components require
special care in order to prevent the build-up of
fungus.
Manual
Non-intended use
•
Using the instrument in any way
contrary to the specifications in the user
manual can lead to bodily harm and damage to
objects. Doing so can impair the functions of
the protective measures provided.
Never install any other plug (NEMA
5-15P) or unscrew any mechanical
components unless expressly instructed to do
so in the instructions.
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose
of used batteries according to the instructions.
The devices and accessories described in
this operating manual have been tested
for safety and potential hazards.
8