Electrical Data And Ambient Conditions - Leica DM500 Manual

Electrical data and ambient conditions

Fuse Replacement
Unplug the instrument before changing any fuses. The
Leica DM500 has two fuses, which are located behind the
power cord receptacle.
•
Use only fuse type: 5×20 mm, 1 Amp/250V, Quick acting
(# 13RFAG30003)
Electrical data
DM500 Input: 100-240 VAC, 50/60 Hz, 5 W (3 W LED)
DM500 B Input: 100-240 VAC, 50/60 Hz, 0.5-0.2 A OR
4× 1.2 V AA rechargeable batteries
•
Use only 1.2 Volt NiMH type AA rechargeable batteries
with a maximum of 2700 mAh. Do not use non-recharge-
able AA batteries.
Leica DM 500, DM500 B
Environment
Temperature for use
Storage temperature
Manipulation shock
Transport shock (unpacked)
Transport shock (packed)
Transport vibrations (unpacked)
Atmospheric pressure "in use" and for storage: 500–1060 mBar
Humidity "in use" and for storage:
Installation Category II (Overvoltage Category)
Pollution degree 2
Manual
+10 °C ... +40 °C
-20 °C ... +52 °C
+50 °F ... +104 °F
25 mm on 50 mm hard wood
100 g / 6 ms
800 mm free fall
5–200 Hz / 1.5 g
20–90%
14