Configuring Switch Settings - FLIR DNR300 SERIES Instruction Manual

14 Using the Main Menu
5. Configure the following:
• SMTP Server: Enter the SMTP server address.
• Port: Enter the port used by the SMTP server.
• Anonymous: Check if your server supports anonymous log ins. Otherwise, leave
this unchecked.
• User Name: Enter the SMTP user name.
• Password: Enter the SMTP password.
• Receiver: Enter the email address that will receive alerts.
• Sender: Enter the sender's email address.
• Attachment: Check to include a jpg image attachment of the camera.
• Title: Enter the subject line for email alerts.
• Encrypt Type: Select SSL or TLS if your server uses encryption. Select None if
your server does not use encryption.
• Event Interval: Enter the interval between alert emails.
• Health Enable: Check to enable health check emails. Health check emails will be
sent periodically to ensure that the system is functioning normally.
• Interval: Enter the interval in minutes for health check emails.
6. Click Test to send a test email.
7. Click OK.
8. Click Save to save settings.

14.2.13 Configuring Switch Settings

You can configure the networking settings for the internal PoE switch.
CAUTION
Changing this information from the default values may disrupt the connection to the cameras. Make sure
your IP cameras are using DHCP or IP addresses that are compatible with your selected settings.
#; r. 1.0/11603/11605; en-US
37