Safety Suggestions - RTI Under Control XP-8 Installation And Operation Manual

XP-8
Advanced Control Processor

sAFety suGGestIOns

read Instructions. Read all safety and operating instructions before
operating the unit.
retain Instructions. Keep the safety and operating instructions for
future reference.
Heed Warnings. Adhere to all warnings on the unit and in the
operating instructions.
Follow Instructions. Follow operating instructions and instructions
for use.
Heat. Keep the unit away from heat sources such as radiators, heat
registers, stoves, etc., including amplifiers that produce heat.
Power sources. Connect the unit only to a power supply of the type
described in the operating instructions, or as marked on the unit.
Power Cord Protection. Route power supply cords so that they are
not likely to be walked on or pinched by items placed on or against
them, paying particular attention to the cords at plugs, at convenient
receptacles, and at the point at which they exit from the unit.
Water and moisture. Do not use the unit near water—for example,
near a sink, in a wet basement, near a swimming pool, near an open
window, etc.
Object and liquid entry. Do not allow objects to fall or liquids to be
spilled into the enclosure through openings.
servicing. Do not attempt any service beyond that described in
the operating instructions. Refer all other service needs to qualified
service personnel.
damage requiring service. The unit should be serviced by qualified
service personnel when:
The power supply cord or the plug has been damaged.
Objects have fallen or liquid has been spilled into the unit.
The unit has been exposed to rain.
The unit does not appear to operate normally or exhibits a
marked change in performance.
The unit has been dropped or the enclosure has been damaged.
tO reduCe tHe rIsK OF FIre Or eleCtrIC sHOCK,
dO nOt eXPOse tHe unIt tO rAIn Or mOIsture.
4
WArnInG!