Front, Real Panels; Programming; Programming The Xp - RTI Under Control XP-8 Installation And Operation Manual

XP-8
Advanced Control Processor
CHAPter 2 | FeAtures
XP-8 FrOnt PAnel VIeW (COVer remOVed)
SD/MM Memory Expansion Card Slot
USB Programming Port
XP-8 reAr PAnel VIeW
MPIO Ports (IR out, RS-232 and power sync in)

PrOGrAmmInG tHe XP-8

The XP-8 must be programmed to operate. All programming is done using
RTI's Integration Designer™ software and is downloaded using the USB
Programming Port located on front of XP-8 or via Ethernet.
The software allows you to create actions (e.g. commands, macros, etc.)
that are associated with events such as button presses on RTI remote
controls, timers or I/O triggers. The software transparently creates all of
the system trigger codes, and generates the correct download for every
device in the system.
12
Menu Button
Exit Button
Backlight Button
Reset Button
RS-232
Relay/Trigger Outputs
Display
Cursor Control Buttons
IR Output Adjustment Controls (8)
Sense Inputs
Infrared Connections
Ethernet
RTI COM
Port
USB
Expansion Port
Power