Specifications - JBL LSR6312SP Owner's Manual

Specifications
System:
Mid – High Frequency (150 Hz – 20 kHz):
Maximum Peak SPL (90 Hz – 20 kHz):
User Controls:
High Frequency Control (3 kHz – 20 kHz):
Workstation Boundary Compensation:
Amplifiers:
Frequency Response (+1, -2 dB):
Enclosure Resonance Frequency:
Low Frequency Extension:
Low – High Frequency Crossover:
Distortion, 96 dB SPL, 1 m:
2nd Harmonic:
3rd Harmonic:
Low Frequency (<150 Hz:
2nd Harmonic:
3rd Harmonic:
Maximum SPL (90 Hz – 20 kHz):
Signal Input:
Calibrated Input Sensitivity:
XLR,+4 dBu:
RCA, -10 dBV:
Self Generated Noise Level:
AC Input Voltage:
AC Input Voltage Operating Range:
AC Input Connector:
Low Frequency Alignment:
Variable Input Attenuation:
Low Frequency:
Sine Wave Power Rating:
70 Hz – 20 kHz
55 Hz
User controls set to default
-3 dB: 65 Hz
-6 dB: 56 Hz
-10 dB: 48 Hz
2.3 kHz
4th – Order Electroacoustic Linkwitz – Riley
<0.5%
<0.5%
<2%
<3%
>106 dB SPL / 1 m
>109 dB SPL / 1 m
XLR, Balanced
RCA, Unbalanced
Passive voltage applied to XLR Pin 2 (RCA tip) produces
outward woofer motion.
96 dB/1 m
96 dB/1 m
<10 dBA SPL/1 m
115/230 VAC, 50/60 Hz (User Selectable)
+/- 15%
IEC
+1.5 dB, 0 dB, -1.5 dB
Active & Bypass
36 dB/Octive Butterworth high-pass at 40 Hz
36 dB/Octive Bessel high-pass at 40 Hz
(for use with subwoofer)
0 – 26 dB (9 dB at 12 o'clock)
Topology: Bridged Class A–B Monolithic
100 Watts (<0.1% THD into rated impedance)
11