Section 6: System Specifications - JBL EON 210P User Manual

Section 6: System Specifications
EON210P
System
System Type:
Maximum SPL Output:
Frequency Range (-10 dB):
Frequency Response (±3 dB):
AC input :
Amplifier
Design:
System Power Rating:
Output Connector:
Mixer
Input Connectors:
Channels
Input Impedance:
Phantom Power:
Output Connectors:
Signal Indicators:
Main Output LED Ladder
Signal Indicators: Ch 1-4
EQ:
System Limiter:
Speaker
LF Driver:
HF Driver:
Coverage Pattern:
Crossover Frequency:
Crossover Type:
Enclosure:
Suspension/ Mounting:
Handles:
Grille:
Shipping Package
Dimensions (H x W x D):
Net Weight of System:
Powered mixer with 2 two-way bass-reflex enclosures
124 dB peak system output (pink noise)
60 Hz - 20 kHz
75 Hz - 19 kHz
120 - 240 V 50/60 Hz, voltage selector switch sets operational range
®
Crown Class D
300 Watts (2 X 150 W Sine Wave Burst)
2 X 1/4" TS (unbalanced) amplifier outputs
8 inputs (4 Mono Mic/Line, 2 X Stereo)
1-4 are XLR / 1/4" jack combo connectors
XLR is a mic level input, 1/4" is a line level input
5-6, one pair of 1/4" balanced TRS jacks (stereo), and a pair of RCA jacks (stereo)
7-8 is a 3.5 mm stereo jack
Ch 1-4 Combo: XLR 3 K Ohms Balanced
Ch 1-4 Combo: TRS 20 K Ohms Balanced
Ch 5-6: TRS 25 K Ohms Balanced
Ch 5-6: RCA 12 K Ohms Unbalanced
Ch 7-8: 3.5 mm 30 K Ohms Unbalanced
30 V
Monitor outputs: one pair of 1/4" balanced TRS jacks (stereo),
and a pair of RCA jacks (stereo)
Headphone output: one 3.5 mm stereo jack
Limit: Red LED indicates limiter active condition
Signal: Green LED indicates signal present
Peak LED: Green = signal present, Red = input overload
Individual channel Bass and Treble controls, center detent, +/-6 dB cut and boost
On Board DSP Limiting and Tuning
1 x JBL 328 H 250 mm (10 in) woofer
1 x JBL 2414H-1 37.5 mm (1.5" ) annular polymer diaphragm,
neodymium compression driver
100º x 60º nominal
2 kHz
Passive network, 2nd order filters (-12 dB per octave)
for high pass and low pass filters
Polypropylene
36 mm pole socket with stabilizing screw
One on top
Powder coated perforated steel
21.5" x 26" x 13.75" (546 mm x 660 mm x 349 mm)
33 lbs. (19 lbs. for unit with powered mixer, 14 lbs. for unit with storage pod)
17