Advertisement
includes two setup buttons,
and
, and associated LED
indicators for state confirmation. For detailed operation,
refer to See Using The Auto EQ Setting on page 11.
After the Auto EQ filters have been set, use
to
turn Auto EQ on or off. An associated LED indicator will
confirm your selection.
Press
to initiate delay setup on
auxiliary outputs,
(left) and
(right). For detailed operation, refer to Delay Setting on
page 14.
The orange
LED will flash during setup and the
green
LED will turn on once the delay time
has been set on auxiliary outputs,
(left) and
(right).
A green LED indicates EVOi.net is being powered.
Use this 8-pin mini DIN connector to connect the EVOi.net
to a PC's RS232 port.
Advertisement
