Advertisement
If your system consists of more than two EVO loudspeak-
ers then these auxiliary/delay systems should be hooked up
to outputs
and
, the
FLOATING BALANCED OUTPUTS
INTERFACE
LINK OUT
LINK IN
MONO
SUM
4 B
For applications of more than two EVO loudspeakers
hooked up to outputs
and
optimum placement of the Measurement Microphone is
illustrated below in Figure 16.
Ideal placement of the Measurement Microphone is again
determined by following the simple height-to-depth ratio of
1:2, where, for a given loudspeaker height the optimum
position is a distance twice the height away from it, into the
listener area. It is still crucial that the Measurement
Microphone remains on the central axis of the room or
listener area, equidistant from each loudspeaker.
Loudspeakers.
MONO
SUM
3 A
2 B
1 A
(the
outputs),
Once the Measurement Microphone has been positioned
and the
running the Auto EQ routine is exactly the same as for the
.
Follow steps 1 – 4 from page 12, pressing
instead of
SETTINGS
AUTO EQ SETTING
LOCKED
EQ SET
MAIN OUT
TEST
SETUP 1&2
HOLD TO CLEAR MAIN
At step 4, once the
indicator has illuminated, the
Auto EQ for all connected EVO Loudspeakers can be
listened to simultaneously. See Testing Auto EQ.
If, as the result of this listening test, the Auto EQ set is not
desirable, then the settings can be cleared. See Clear Auto
EQ, and Auto EQ can be repeated.
function has been disabled,
.
EQ SET
AUX OUT
AEQ ON
SETUP 3&4
HOLD TO CLEAR MAIN
Advertisement
