Incoming Call - AT&T SynJ SB67158 User Manual

Appendix
Telephone base display screen messages
------Line X------

Incoming call

Intercom to:
Line X
Memory is full
Message full
Msg. transferred to
mailbox X
No Device is
connected to the
headset jack at
base
No device
registered
No items stored
M.O.H. currently in
use. Please
try again later.
Please enter
another access
code.
Please set the
alert #
Press SPKR to
confirm the
alert call
PTT To:
X:Deskset X
Release PTT
key to stop
PTT To:
X:Handset X
Release PTT
key to stop
There is an incoming call.
You have started the intercom process, and need to enter the
number of the handset you wish to call.
The telephone line X is in use.
The directory is full. You cannot save new entries unless you
delete some current entries.
The system memory is full. You cannot record new messages
unless you delete some old messages.
A message is transferring from the general mailbox to a particular
private mailbox.
There is no audio device connected to the AUX IN jack at the
telephone base.
There are no handsets or headsets registered to the base to
deregister.
The redial list is empty.
You cannot record or playback music on the telephone base while
a call is listening to the current hold music.
The access code you are trying to save already exists in
the system.
You are trying to confirm the alert number or set the notify alert
on or off before you set the alert number.
Press the telephone base speakerphone key to call the alert
call number.
You are using push to talk (PTT) intercom to call Deskset X.
Release the one-touch EXT 1-0 key to complete a one-way
conversation.
You are using push to talk (PTT) intercom to call Handset X.
Release the one-touch EXT 1-0 key to complete a one-way
conversation.
83
to complete a one-way
to complete a one-way