Table of Contents
Advertisement
+
1.8 OPTIONAL
ACCESSORIES
Switching
Cards - Keithley offers over 20 different models of
switching cards. In addition to general purpose scanning and
matrix applications,
cards are designed for special applications
with signal handling capabilities
that include:
l
Low voltage switching to 20nV.
l
Low current switching to 1 OfA.
l
High frequency switching to 500MHz.
o Thermocouple
switching with a precision temperature
refer-
ence.
l
High voltage switching to 1 OOOV.
Further details on switching cards can be obtained by contact-
ing a Keithley representative
or sales office.
Model 7008-3 IEEE-488 Cable-The
Model 7008-3 is a 1 me-
ter (3 feet) IEEE-488 cable. The cable has 24 stranded wire
conductors and is terminated on each end with IEEE-488 stan-
dard connectors.
Model 7008-6 IEEE-488 Cable-The
Model 7008-6 is a 2 me-
ter (6 feet) IEEE-488 cable. The cable has 24 stranded wire
conductors and is terminated on each end with IEEE-488 stan-
dard connectors.
Model 7010 Cable Adapter-The
Model 7010 is an IEEE-488
cable adapter. The adapter extends the IEEE-488 connector by
one connector width.
Model 7051-2 1 The Model 7051-2 is a (2 feet) BNC to BNC
cable. It is especially
useful for daisy chain operation.
Model 7051-5 -
The Model 7051-5 is a (5 feet) BNC to BNC
cable. It is especially useful daisy chain configuration.
Model 7068 Fixed Rack Mount-The
Model 7068 is a fixed or
stationary
rack mounting kit that mounts the Model 706 in a
standard 19 inch rack. The dimensions are 13-3/4 inches deep
x 7 inches high (350mm x 178mm).
Model 7069 Slide Rack Mount with Handles -
The Model
7069 is a sliding rack mount kit. It enables one Model 706 to be
rack mounted with the added feature of sliding the instrument
for easy access. The dimensions
are 3-3/4 inches deep x 7
inches high (95mm x 178mm).
1.9 REPACKING
FOR SHIPMENT
The Model 706 should be packed in its original carton. Before
packing, wrap the instrument in plastic. After it is placed in the
box, surround the instrument with Styrofoam packaging
mate-
rial. Remove all cards and ship separate.
If the Model 706 is to be returned to Keithley Instruments
for
calibration
or repair, include the following:
l
Write ATTENTION
REPAIR DEPARTMENT
on the address
label.
= Include the warranty status of the instrument.
l
Photocopy and complete the service form at the back of this
manual and return it with the instrument.
1-2
+
Advertisement
Table of Contents
