Speedometer; Overview; Activation; Message On The Speedometer - Husqvarna FE 350 EU Owner's Manual

7

SPEEDOMETER

7.1

Overview

7.2

Activation

7.3

Message on the speedometer

7.4

Setting the speedometer

1 Overview of indicator lamps (
2 Left button
3 Display
4 Right button
401908-10
Activating the speedometer
The speedometer is activated when one of the buttons is pressed or an impulse comes
from the wheel speed sensor.
401908-01
Possible states
401901-01
Condition
The motorcycle is stationary.
–
Press both buttons for 3–5 seconds.
The Setup menu is displayed. The UNIT display flashes.
–
Press one of the buttons to select UNIT for the speed in kilometers KM/H or miles
M/H.
401909-01
–
Wait for 5 seconds.
The speedometer changes to the next menu item. The
–
Press one of the buttons to select the 24h or 12h display of the clock.
401911-01
p. 16)
Battery voltage of the speedometer – Battery voltage of the speedometer
is too low. Change the battery.
Service – Service is due. Contact an authorized Husqvarna workshop.
20
symbol flashes.