Controls; Clutch Lever; Hand Brake Lever; Throttle Grip - Husqvarna FE 350 EU Owner's Manual

6

CONTROLS

6.1

Clutch lever

6.2

Hand brake lever

6.3

Throttle grip

6.4

Kill switch (FE 350 EU, FE 350 AUS)

6.5

Kill switch (FE 350 USA)

The clutch lever
The clutch is hydraulically operated and self-adjusting.
C00530-10
Hand brake lever
The hand brake lever is used to activate the front brake.
C00545-10
The throttle grip
C00531-10
Kill switch is fitted on the left side of the handlebar.
1
Possible states
• Kill switch
engine can be started.
• Kill switch
out if it was running, or does not start if it was off.
C00590-10
Kill switch is fitted on the left side of the handlebar.
1
Possible states
• Kill switch
engine can be started.
• Kill switch
out if it was running, or does not start if it was off.
C00593-10
is fitted on the left side of the handlebar.
1
is located on the right side of the handlebar.
1
is fitted on the right side of the handlebar.
1
in basic position – the ignition circuit is closed in this position and the
pressed – the ignition circuit is open in this position, the engine goes
in basic position – the ignition circuit is closed in this position and the
pressed – the ignition circuit is open in this position, the engine goes
14