Adjusting The Rebound Damping Of The Fork; Handlebar Position; Adjusting The Handlebar Position - Husqvarna FE 350 EU Owner's Manual

Husqvarna fe 350 motorcycles 2014 owner's manual
Table of Contents

Advertisement

11
TUNING THE CHASSIS
11.13

Adjusting the rebound damping of the fork

Info
The hydraulic rebound damping determines the fork suspension behavior.
11.14

Handlebar position

11.15

Adjusting the handlebar position

Warning
Danger of accidents Handlebar breakage.
If the handlebar is bent or straightened it will cause material fatigue, and the handlebar can break. Always replace handlebar.
Guideline
Compression damping
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
Turn the red adjusting screw
Info
Adjusting screw
The rebound damping is located in the right fork leg REB (red adjusting
screw). The compression damping is located in the left fork leg COMP (white
adjusting screw).
Turn counterclockwise by the number of clicks corresponding to the fork type.
Guideline
C00560-10
Rebound damping
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
On the upper triple clamp, there are two holes at a distance of
Hole distance
The holes on the handlebar supports are placed at a distance of
Hole distance
The handlebar supports can be mounted in four different positions.
101859-10
x
all the way clockwise.
1
is located at the upper end of the right fork leg.
1
15 mm (0.59 in)
A
3.5 mm (0.138 in)
B
15 clicks
13 clicks
11 clicks
15 clicks
13 clicks
11 clicks
to each other.
A
from the center.
B
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fe 350 ausFe 350 usaFe 2502014 fe 350

Table of Contents