Table of Contents
Advertisement
6.2.4.1. System parameters
Positioning measurement system
The type of measurement system is defined in this parameter.
Axis deactivated
Microcontroller
PID Controller
Analog potentiometer
Direction change manual
The allocation of the direction for the corresponding keys can be set as inverted in this parameter.
normal
inverted
Drive signals
With configuration of the motor signals different starting combinations for the different speeds can
be set.
Drive signals = Mode 1
3 speeds (ELGO-standard)
Speed = output signals 1-3 ascending
Output 4 sets direction reverse
Output signals
Creep speed forward
Slow speed forward
Fast speed forward
Creep speed backward
Slow speed backward
Fast speed backward
Drive signals = Mode 2
2 speeds
Independent outputs forwards and reverse (additional information BCD-Code: cca553)
Independent outputs fast and slow
Output signals
Creep speed forward
Slow speed forward
Fast speed forward
Creep speed backward
Slow speed backward
Fast speed backward
1
2
3
4
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
2
3
4
X
X
X
X
X
X
X
X
- 27 -
Configuration and Functions
Advertisement
Table of Contents
