6.2.2. Axis menu / times
The times relevant for the respective axes can be entered from 0.1 to 99.9 seconds.
Axis distances
Access to parameters concerning distances e.g. speeds etc.
Axis times
Access to parameters concerning times e.g. position reached, zero speed monitoring, rotary encoder
etc.
Axis analog
Access to parameters concerning the analog output.
General Parameters Axes
Access to general parameters concerning the axes.
Position reached
Spindle compensation
Velocity change manual mode
System monitoring
Fall-delay time controller enables
Start delay time
Shutdown Position control
Retract
Reversal Reference drive
- 21 -
Configuration and Functions