2.1
Introduction
You can access most of the connectors from the top of the board. If you have a num-
ber of cards installed, you may need to partially remove the card to make all the con-
nections.
2.2
Parallel Port (LPT1)
The parallel port is normally used to connect the motherboard to a printer. The PCA-
6028 includes an onboard parallel port, accessed through a 26-pin flat-cable connec-
tor, LPT1.
2.3
USB Ports
(USB01USB23,USB45,USB8,USB9,USB1011)
The PCA-6028 provides up to 10 USB (Universal Serial Bus) on-board ports with
complete Plug & Play and hot swap support for up to 127 external devices. These
USB ports comply with USB Specification 2.0 and 3.0, support transfer rates up to
480 Mbps (USB2.0) and 5 Gbps (USB3.0). The USB interface can be disabled in the
system BIOS setup.
PCA-6028 User Manual
14