Replacing Ink Tube - Xerox 7142 Service Manual

RJ-901C/RJ-900C Maintenance Manual
2. Remove the CR board assembly-retaining screw (tapping screw M3
3. Replace the CR board assembly.
4. To reassemble the unit, reverse the removal procedure.

4.10.2 Replacing Ink Tube

NOTE
Before replacing the ink tube, remove the following covers.
• R side cover:
• I/H cover: "4.2.4 Removing Ink Holder (I/H) Cover" p.4-11
• Top cover: "4.2.6 Removing Top Cover" p.4-13
• Media guide R2:
2
"4.2.1 Removing R Side Cover" p.4-6
"4.2.7 Removing Media Guide R2" p.4-14
×
8, S tight cup: 4pce).
No.
1 CR board screw
2 CR board
3 CR board mounting plate
3
4-65
4 Parts Replacement
Part name