Replacement Of Maintenance Section Components; Removing Maintenance Base Assembly - Xerox 7142 Service Manual

RJ-901C/RJ-900C Maintenance Manual

4.7 Replacement of Maintenance Section Components

4.7.1

Removing Maintenance Base Assembly

NOTE
• When replacing the parts inside the maintenance assembly, make sure to reset the following
counter parameters.
• "Waste Ink" or "Cleaning":
• Before replacing the parts in the pump cap assembly, remove the following parts.
• R side cover:
• Ink holder cover:
1. Remove the screws (xx: 3pce) retaining the IC holder mounting plate.
Side
1
No.
"6.3.1 Counter Display Menu" p.6-3
"4.2.1 Removing R Side Cover" p.4-6
"4.2.4 Removing Ink Holder (I/H) Cover" p.4-11
1
IC holder mounting plate-retaining screw (XX)
1
IC holder mounting plate
2
3 Frame
Rear side
Part name
4-47
4 Parts Replacement
Scroller side
1