Head Rank Input Menu - Xerox 7142 Service Manual

RJ-901C/RJ-900C Maintenance Manual
5.5.2

Head Rank Input Menu

This menu is used to input the head rank.
The head rank is used to determine the head-driving voltage and correct the head temperature.
To input the head rank, follow the steps below.
(1) Input Method Selection
When inputting the head rank, select either of the following methods:
• Input with QR code
• Input with operation panel
NOTE
If you do not use a QR code reader, do not select "Input Rank: QR Code". If you select it, press
[Cancel] key to return to the rank input selection menu.
Next menu
Next menu
(2) When Input with QR Code is Selected
Check that the operation panel displays "Input QR code".
Enter the QR code from QR code reader.
When input value is correct, the diplay
shows Initial Ink Chage menu.
(3) When Input with Operation Panel is Selected
Using the keys in the operation panel, enter the parameter values on the upper level and lower level of head
rank.
When input value is correct, the diplay
shows Initial Ink Chage menu.
Previous menu
Previous menu
[Enter] key
[Enter] key
[Enter] key
5-25
Input by using QR code
Input from the operation panel
If incorrect value is set, an error occurs.
Press [Enter] key to retry.
If incorrect value is set, an error occurs.
Press [Enter] key to retry.
5 Self-Diagnosis Mode