Sending Parameters - Xerox 7142 Service Manual

RJ-901C/RJ-900C Maintenance Manual
7.3.6

Sending Parameters

NOTE
Before sending parameters, perform the following work.
• Receiving parameters:
• Firmware installation:
1. Click [Parameter Send].
2. When the "Select of send parameter file" window
opens, select the parameter file to be transferred
and click [Open].
3. In the "Parameter Send check" window, click
[OK].
Sending will start.
4. When sending completes and the "Send
completed" window opens, click [OK].
"7.3.4 Receiving Parameters" p.7-14
"7.3.5 Firmware Installation" p.7-15
7-19
7 Adjustment